These cells typically house BBO, KDP, KD*P, or LiNbO₃ crystals of either Type I or Type II orientation.

The cells fit into any of the Autotrackers that INRAD has manufactured over the years as well as the manually tuned 820-360 gimbal mount.

The 561-044 cell is windowless with the clear aperture set by the size of the crystal. Typically, BBO is housed in this cell with the surfaces of the BBO protected from attack by moisture with a thin dielectric coating.

The 563-1117/UV cell houses either 1 or 2 crystals with a maximum crystal length of 30 mm. The clear aperture is 11 x 17 mm. The cells have fused silica windows that keep the crystal surfaces clean and that seal the water-sensitive crystals against moisture. The windows of the cell, typically, have an AR coating to reduce reflection losses. Please, select the coatings from one of our standard AR Coatings. Typically, Type I KDP or Type II KD*P crystals are housed in this cell.

The 563-1117/IR cell houses either 1 or 2 crystals with a maximum crystal length of 30 mm. The clear aperture is 11 x 17 mm. The cells have calcium fluoride windows that keep the crystal surfaces clean and that seal the water-sensitive crystals against moisture. The windows of the cell are un-coated. Typically, Type I LiNbO₃ crystals are housed in this cell.

Please note that the 562-126/UVand 562-126/IR cells have become obsolete. They are offered only on a replacement basis.

Questions? Contact Us